Woods builds quality products for landscaping professionals and that includes tools for snow removal. Their line of snow blowers is built to attach to tractors ranging from 15 to 175 hp, delivering maximum performance with the power available.
Features Included with All Models of Woods Snow Blowers
These blowers are ASABE quick hitch compatible for fast, easy attachment — just line up the three points to your tractor and lock in the pins.
Even the smallest model uses a two-stage snow throwing system. Instead of relying solely on the auger, there’s a separate four blade fan inside the chute to propel snow, increasing throwing force without requiring increased power.
If the mechanism is jammed, the shear pins will break off to halt power transfer, protecting expensive components like the auger. Once the jam has been cleared, just slide in a new set of pins, and your blower is ready to be put back to work.
The sides are built with reinforced steel plates to take the brunt of abuse to keep the snowblower running when you bump into obstacles.
Unless noted, all models are designed to be used with a 540 RPM PTO.
SB54S
PTO: 15-25 hp
Working width: 54 inches
Working height: 24 inches
Three point hitch: Cat 1
Driveline: Cat 3
The smallest model in Woods’ lineup still delivers plenty of snow clearing power. The chute can rotate 270 degrees and can be operated from the tractor using an optional hydraulic or electric rotator.
SB64S
PTO: 15-25 hp
Working width: 64 inches
Working height: 24 inches
Three point hitch: Cat 1
Driveline: Cat 3
Want to work faster? This model has all the features of the SB54S with a wider working width.
SB74C
PTO: 30-50 hp
Working width: 74 inches
Working height: 26 inches
Three point hitch: Cat 1 and 2
Driveline: Cat 3
A bigger auger and housing increases working height for clearing deeper snow, while retaining the chute articulation of smaller models.
SB84C
PTO: 35-60 hp
Working width: 84 inches
Working height: 26 inches
Three point hitch: Cat 1 and 2
Driveline: Cat 3
This model delivers added clearing width compared to the SB74C.
SS84-2
PTO: 60-80 hp
Working width: 84 inches
Working height: 34 inches
Three point hitch: Cat 2 and 3
Driveline: Cat 4
To maximize clearing height while keeping total size in check, this model uses a pair of augers with the second auger mounted above the first. Chute rotation is limited to 200 degrees, but this model comes with a built-in hydraulic rotator. The auger edge can be replaced, extending its working life, while a telescoping hitch makes it easy to connect this blower to your tractor.
SS96-2
PTO: 80-150 hp
Working width: 96 inches
Working height: 38 inches
Three point hitch: Cat 2 and 3
Driveline: Cat 4
Along with increased cutting width compared to the SS84-2, this model is also designed to work with a PTO running at either 540 or 1,000 RPM.
SS108-2
PTO: 125-175 hp
Working width: 108 inches
Working height: 38 inches
Three point hitch: Cat 2 and 3
Driveline: Cat 4
The largest snowblower Woods sells, this model has all the features of the SS96-2 with a larger width.
Where to Buy Parts and Accessories for Woods Snow Blowers
Shanks Lawn and Garden is a certified Woods dealer, supplying parts and service for all of their equipment from mowers to snow blowers. Visit our shop at 4900 Molly Pitcher Highway, Chambersburg, PA. That’s just off of Route 11. Driving in from I-81? To get here, take Exit 10 to Marion.
Not a local? We can still ship anything you need to any address in the U.S. and Canada. Visit us on the web at www.shankslawn.com.